Tornado Boat Lift 12,000 lbs

Category: .
12k Tornado Boat Lift installed on Lake Okanagan in Kelowna

Description of the Tornado Boat Lift 12,000 lbs:

6′ Lifting Range – Bigger and Better than the Competitors

  • Capacity: 12,000 lbs
  • Frame Size: 174″ L x 132″ W
  • Bunk Length: 168″


  • Welded Wear Sleeves & Stainless Pivot Pins.
  • Long Range Wireless Remote With 2 Transmitters.
  • Sleek Low Profile Design / Up To 18,000 lbs. Capacity.
  • Marine Grade Aluminum & Stainless Steel Construction.
  • Aluminum Bunks With Rubber Capped Adjustable Inserts.
  • Stainless Hydraulic Rams With Environmentally Friendly Hydraulic Oil.

Tornado Lifts are designed for fresh and salt water, with the best warranty on both frame and hydraulics.

Tornado Lift Design

We weld all components that are not adjustable, which prevents premature loosening of parts and there is no contact of dissimilar metals in a salt water environment, we enclose our hydraulic shafts in our exclusive Air Bellow. The ‘Air Bellows’ prevent any harmful particles and marine growth from damaging the hydraulic cylinders, seals and shafts.

Golden Tornado Competing Products
  • 6061 T6 Aluminum Frame with stainless steel fasteners.
  • There’s a reason why aluminum is the material of choice in marine environments !
  • Galvanized steel which will eventually rust.
  • Aluminum rubber capped Multi-Bunks (Easily adaptable for pontoon boats) that will last the life of the lift.
  • Spring-beam design distributes the load more evenly. Wooden bunks have load concentrations above the support brackets.
  • Wood carpeted bunks that will rot and require replacement.
  • Carpet is also prone to holding sand and grit that will scratch your gel-coat over time.
Hydraulic System:
  • Marine grade – stainless steel ram, cylinder boot with patented Air Bellows!
  • All hydraulic fittings are stainless steel, hoses are domestically made
  • Warrantied in both fresh and salt water.
  • EPA approved water soluble hydraulic oil
  • No protection, exposed shaft.
  • Warrantied only in fresh water.
Pivot Areas:
  • Welded wear sleeves with stainless steel pivot pins.
  • Golden’s lifting arms are on top of side beam (double-shear joints). Double shear joints have less than half the stress, and do not twist the beam like single shear joints.
  • No specialized pins, threaded bolts used.
  • Lifting arm is to the side of the side beam (single shear joint).
Wireless System:
  • Standard long range wireless with 2 remotes
  • Standard wireless with 1 remote
More Accessories:
  • Boat covers, canopies, bow stops, motorstop, underwater lighting and many more.
  • Limited selection of accessories.

Tornado Lift Capacity

2,000#, 4,000#, 6,000#, 8,000#, 10,000#, 12,000#, 15,000″, 18,000#.

View Brochure

Additional Information on the Tornado Boat Lift 12,000 lbs:


12,000 lbs

Bunk Length


Frame Size

174″ L x 132″ W